Flat Tire Changing Tips for your Honda

How to change a flat tire on your Honda vehicle?

Learn how to change a flat tire on your Honda vehicle at Capital Honda in Charlottetown, PE. These easy flat tire changing tips will go a long way towards ensuring that you are never again stuck on the road with a flat tire with no help. Continue reading to learn more about the flat tire changing tips at Capital Honda.

Steps to Change a Flat Tire

Step 1: Ensure your vehicle is on a flat surface and the parking brakes are engaged. Turn on the hazard light signal or make use of reflectors if you are on the highway.

Step 2: Take out the tool kit and spare tire from under the trunk and bring them towards the side of the flat tire.

Step 3: Use the lug wrench to loosen the lug nuts slightly. Now arrange the jack in the designated groove near the flat tire and raise the vehicle until the tire lifts off the surface.

Step 4: Completely take off the lug nuts and keep them safe. Remove the flat tire and replace it with the spare tire.

Read more: Service Department at Capital Honda

Step 5: Replace the lug nuts and lower the jack until the wheel touches the surface.

Step 6: Use the lug wrench and completely tighten the lug nuts. Remove the jack.

Step 7: Replace the tool kit and the flat tire in the compartment under the trunk lining.

Step 8: Visit the nearest Honda dealership to check your tires for air pressure and other service needs.

Read more: How to clean the interior of my vehicle?

Head out to Capital Honda for a complete view of our services offered at Charlottetown, PE. You can schedule a service appointment and have your car checked and serviced before any road trip you might undertake. You can also check your repair order status and stay on track with your vehicle. Contact us at Capital Honda for more information.